Visit The Dirt Forum for More Information

Author Topic:   M/C mounting tips (sleepy gomez)
neil rucker
Member
posted March 13, 2003 10:10 PM
this one is foryou (SLEEPY) you talked about a mount for puting stock master cylinder on without booster in SCR magazine recently. unsure how to make one. please explain. email a drawing if possible. thanks very much. neil jnrtlr@mindspring.com


gould
Member
posted March 14, 2003 10:31 PM
just cut ya a 1/4 inch plate and put the mounting holes in it for the firewall and the master cylinder. you will need to shorten the plunger also. theres a post on here somewhere that talks about it. do a search for hydroboost. gould

------------------
Dirts for racin', asphalts for gettin' there!!


gould
Member
posted March 14, 2003 10:34 PM
i saved ya the trouble, heres what sleepy said. Just use a stock (gas engine) master cylinder, Forget vac or hyd, straight manual works OK. Make an adapter plate like Gould said. Connect your front and rear brake lines together with an "H". With rear drums and front discs getting the same pressure at the same time you will have a little rear brake bias. I have used this on several cars where we had to keep stock master cylinders and couldnt use any brake bias adjustment. Besides it's cheap.
SLEEPY

------------------
Dirts for racin', asphalts for gettin' there!!


Back to the Archives