Visit The Dirt Forum for More Information

Author Topic:   spindle savers?
stormy
Member
posted March 12, 2003 05:48 PM
anyone heard of spindle savers? what are they? thanx- jason


CAGEMAN
Member
posted March 12, 2003 07:08 PM
Piece of metal that goes from the ball joint to the tie rod hole and stiffens it up so something else bends that you cant easily see after a bump or rub.


stormy
Member
posted March 12, 2003 07:42 PM
can you weld it at both points or does the tie rod end stud need to go thru it so it can swivel? Also i am running on a 3/8 mile semi bank dirt track, should i remove the front sway bar or not. running a buick regal.


BK19
Member
posted March 12, 2003 09:49 PM


neil rucker
Member
posted March 13, 2003 10:26 PM
neat piece! complements of "speedy"bill smith "SPEEDWAY MOTORS" for metric spindles only


neil rucker
Member
posted March 13, 2003 10:29 PM
you proboably can get by with the swaybar unless you run fairly heavy springs such as lf 1200 rf 1400


Racer98
Member
posted March 16, 2003 08:18 AM
are they worth using?


stormy
Member
posted March 16, 2003 09:57 AM
I'm gonna find out, i got some ordered, they're only about 25 bucks for a pair of em, it sure can't hurt to try em i guess.


Back to the Archives