Visit The Dirt Forum for More Information

Author Topic:   Carb adapter?
Eljojo
Member
posted February 28, 2003 06:40 AM
I need a little help here...what do you think is the best way to get a two barrell Holley carb onto a q-jet manifold? Is one adapter better than others? Please help-the racng season is almost here!!!

[This message has been edited by Eljojo (edited February 28, 2003).]

racer2
Member
posted February 28, 2003 07:01 AM
i have one a buddy milled for me.
1 inch thick,for a 350 cfm Holley.
i'll have to see if its for a q jet or holley


Pickel
Member
posted February 28, 2003 08:35 AM
I run one of those cheep 2 to 4 bbl adapters seems to work for me ..alot of guys I run with have the one that you can move back and forth to ajust what you want..jus depends on you budget..lol


KPLugnut
Member
posted February 28, 2003 03:23 PM
Several brands of phenolic adapters for that application can be bought for $75 or less.
The important thing to remember is to make sure the carb is at least over the rear holes of the quadrajet intake.
If the intake is milled out so the plenum area is open, then the slider type adapter will help more than the very inexpensive aluminum Mr Gasket one.
We can build anything anyone needs, fwiw...

KPLugnut

Back to the Archives