Visit The Dirt Forum for More Information

Author Topic:   POWERGLIDE PREP
neil rucker
Member
posted February 26, 2003 06:15 PM
can anyone tell me if it is possible to setup a powerglide tranny with direct drive coupler that works without clutch pedal or lever? it would engage when you rev the engine, like a stall speed converter only, it is all internal with no linkage or slave necessary. (creative rules interpretation) nice way of putting it. any help would be great.thanks. PS does anyone sell such a unit?


jammin
Administrator
posted February 26, 2003 06:22 PM
www.tciauto.com


jammin


TCI
Member
posted February 27, 2003 01:48 PM
Check the circle Track section on our website. We also have a dummy converter than we can install a drain plug in.

Scott

------------------
Scott Miller
TCI Automotive, LLC
662-224-8972 ext 332
scott@tciauto.com
www.tciauto.com


merlinmech2
Member
posted February 27, 2003 08:10 PM
Drill a 7/64 hole in the bypass line and reverse piston. Can't tell there's not a converter in it without looking under the car. Been doing that for 7 years now.


Back to the Archives