Visit The Dirt Forum for More Information

Author Topic:   Adjustable Rear upper trailing arms
DEEDDUDE
Member
posted February 25, 2003 08:54 PM
Anyone know where to find them? I saw some that had AFCO stickers on them, but the guy didn't know where they came from. I can't find anything like them in the AFCO catalog. They could be something that was fabricated. I need some for adjusting the pinion angle. Any help is appreciated.


eaton89
Member
posted February 25, 2003 09:33 PM
I was told if you need just a little ajustment to drill new holes and weld a big washer over the new hole on both sides and bolt it back together. Makes sence to me but I havent tried it my self.


outlawstock17
Member
posted February 25, 2003 10:35 PM
i made my own with 3/4" heims and 1" DOM tubing threaded on the ends. i drilled the factory frame holes out to 3/4" and used spacers to put the heim in the center of the mount. when i installed the 9" rearend, i used cut up suspension adjustment plates with 3/4" holes to make my housing brackets.


Back to the Archives