Visit The Dirt Forum for More Information

Author Topic:   shaker screen
posted February 22, 2003 06:54 PM
I am competing in a traveling enduro series...
We will be running on 2 dirt tracks this year ...
I could use some advice on making a shaker screen..

posted February 22, 2003 08:19 PM
i use 3 layers on my car first is a 1/2 in mesh then a 1/4 and finally use window screen. i'm going to buid an endureo car this year and will add some lenghts of dog chain with lug nuts on it to hang in front of it to help shake stuff off a buddy of mines dad used to do that back in the day on his endureo this the midwest series ? i might try to hit the show at hawkeye downs this year with mine

posted February 23, 2003 12:37 AM
I dont run this class but I have been told to run some chain as an example. Mount it on the top and loose on the bottom and with the car movement it will "shake off" the mud.

Smith Racing Team

posted February 23, 2003 02:27 AM
I run the front end completly sealed off and then have a screen that is attached to a bungy cord at the top that hooks to each side, then I zip tie big nuts to the bottom of the mesh, you can easily pull the screen out when you want to clean or when you have to work up there, those screens always have sharp peices hanging off.

[This message has been edited by CAGEMAN (edited February 23, 2003).]

posted February 23, 2003 03:21 AM
I am running the new N.E.E.T.S tour this year.
We have Accord (NY) and Middletown (NY) on our secdule.
I have never raced on dirt before but I love to drive FAST in the snow....LOL....

posted February 23, 2003 07:30 AM
Try fireplace screen, attach it at the top only let the bottom hang loose. That way the mud drops off as you hit bumps. (and other cars hehehe) hope this helps..loojack

posted February 24, 2003 07:10 AM
I have used fireplace screen too it works good. The kind that slides open and closed. I mount it so it can shake up and down. I just keep an eye out for it on trash day:-)

Back to the Archives