posted February 11, 2003 03:16 AM
what would be the best way to change cross weight.I thihk i mite be a little lite.right now i have 49% cross and 50% rear.
posted February 11, 2003 03:17 PM
I'm assuming that you can't run ***** jacks but there are still a few different ways to do this. Using adjustable spring cups is probably the easiest way, all you do is ***** it up or down and place it on top of the spring. There are also spring cups that are not adjustable which means that you have to trim the cup to adjust your crossweight. The easiest thing to do is put a larger RF or LR on the car or sput a smaller tire on the RR or LF, this will increase your cross also. Similarly, adding air to the RF and LR and decreasing air in the RR and LF will produce a small change. Hope I've helped.
posted February 11, 2003 11:24 PM
so if i want increase cross weight i would add to the RF. and LR.? thanks.
posted February 12, 2003 07:31 AM
posted February 12, 2003 09:32 AM
i had the same problem i have to run my fuel cell completely full at all times and went to a bigger tire on the rf you could also add air pressure in bolrth corners to help out also