Visit The Dirt Forum for More Information

Author Topic:   Priming power steering?
racinfool
Member
posted January 30, 2003 06:07 PM
Is there a special procedure to 'prime' or 'bleed' a power steering box. It's a GM 76 transam box.

Thanks again

DMA Racing
Member
posted January 30, 2003 06:20 PM
hey, i just fill mine up,turn it by hand with the front jacked up afew times make sure its full,then crank it up and turn it some more at idle


outlawstock17
Member
posted January 30, 2003 06:21 PM
with the engine running and the resevoir full, jack the front tires off the ground and turn the steering lock to lock and hold it on the locking points briefly.


rico 08
Member
posted January 30, 2003 09:40 PM
jack it up turn lock to lock then start it.


Back to the Archives