Visit The Dirt Forum for More Information

Author Topic:   terminator chassis?
HIT THE WALL
Member
posted January 17, 2003 12:28 PM
on terminators web site it has a options of the 99 terminator suspesion upgrade does anyone know what that is?


istock59
Member
posted January 17, 2003 08:59 PM
99 Terminator rear suspension is the IMCA legal suspension option. I believe the other suspension "package" isn't IMCA legal.


o5racer
Member
posted January 18, 2003 09:10 PM
so what exactly is it? I have been wondering that myself.


CUSTOMPERFORMANCE
Member
posted January 18, 2003 09:24 PM
Stock spring position over axle is IMCA legal, some of the early cars of termintaors had the springs mounted ahead of the axle in a non stock position. Also have known of some that were too short of wheelbase as well.


HIT THE WALL
Member
posted January 19, 2003 10:15 AM
thanks that helps just did not know what they where talking about before


istock59
Member
posted January 19, 2003 09:07 PM
I believe the early Terminators had one spring in front of the rearend centerline, and one spring behind. My brand new Terminator has both springs shifted slightly forward of that centerline.

And the IMCA rule is that 50% of the spring must be over the rearend axle tube. Not necessarily in the stock location.

[This message has been edited by istock59 (edited January 20, 2003).]

Back to the Archives