Visit The Dirt Forum for More Information

Author Topic:   metric setup
timaladd
Member
posted January 06, 2003 01:51 AM
i run a 2900# metric on a steep banked 3/8 clay track in west tennessee. i am looking for some good starting points for springs and shocks. i usually run 54%rear and 53% left. i like to run light springs up front to unload the left rear(i like to run alot of left rear(vs right rear). anyway, if anyone runs a similar setup let me know what you run.


Eljojo
Member
posted January 06, 2003 06:49 PM
How long have you run that set up and what's it like for you? I run a very high banked (Gap) in East Tenn and run similar rear, but very heavy fronts.


timaladd
Member
posted January 07, 2003 02:05 AM
i am building two cars, on to race at 1/4 mile medium banked and one for the high banked. the setup works well for the 1/4 mile. i was just wondering how much i had to increase the spring rates for the high banked track. for the 1/4 mile 800lf, 900rf, and 300lr and 250 rr.


Big Dawg
Member
posted February 04, 2003 06:41 PM
I run a 3050 pd. metric car I run 1050LF,1200RF,225-250LR,and200RR. I run around 54% left 53.5% rear.I run alot of bite in the left rear compared to right rear-right around 350pds. difference.It run like a scalded dog,especially if I drive it in deep.


Back to the Archives