Visit The Dirt Forum for More Information

Author Topic:   2-link set-up help
billyjean23
unregistered
posted August 05, 2002 02:34 PM           
running a 2001 dw8 2-link: lf650, rf750, lr225, rr175-rear%60, cross%51, left%52. Running a monty bar with about an inch and a half to two inches of travel. Left trailing arm is in top hole and right trailing arm is in bottom hole. Usually run about 20-50 pound of left bite. Also running a short panhard bar in front with over 6 inches of rake in it. Driver says it feels like the car is rolling way over on the right rear, but we only have about an inch and a half to two inches of shock travel on the right rear. The left rear really lifts out of the corner and down the straight. I don't know if this is good or bad. Car wants to spin the wheels out of the corner but gets through well. Any help will be greatly appreciated!!


2nd2none
Member
posted August 05, 2002 02:42 PM
Try taking some rake out of the panhard bar. and move the RR trailing arm up to middle hole.


billyjean23
unregistered
posted August 05, 2002 03:15 PM           
2nd2none:
On another post you replied that you are running a solid bar instead of a spring bar. I asume you don't have to run a 90-10 with a solid bar. What kind of pinion angle do you run? Also what kind of angle do you run the bar at.
Thank you