Visit The Dirt Forum for More Information

Author Topic:   quickspeed biscit rod
WPP
Member
posted June 17, 2002 10:36 PM
Have any of you guys ran one of these biscit rods from quick speed i have heard they really work good.


andykmod
Member
posted June 17, 2002 10:44 PM
Where do you get them from? Do they have a site? I also have heard the same.


WPP
Member
posted June 18, 2002 12:50 AM
I think it is called quickcar.net I never have run a biscit rod but i know lightening chassis run them and they do very well i am just getting tired of my afco pull messing up


WPP
Member
posted June 18, 2002 10:36 PM
Anybody run one of these i would like to hear something before i order one thanks


Tom Asmus
Member
posted June 19, 2002 12:24 AM
I run the same one but its made by Allstar, I too ran the Afco spring pullbar. I changed and I wont go back!!! That biscuit is well worth the money!!!


fr1
Member
posted June 19, 2002 05:27 PM
The pullrod is a Quickcar. The difference between it and a Allstar is that the Quickcar has 2 rubber biscuits in the housing (traction side).

One thing we have done on our swing arm cars is to run the softer SW Speed red rubbers on the traction side. The Quickcar rubbers are harder.

We have these in stock at RaceMart ph: 660 465-2069.

fr1
Member
posted June 19, 2002 05:29 PM
The pullrod is a Quickcar. The difference between it and a Allstar is that the Quickcar has 2 rubber biscuits in the housing (traction side).

One thing we have done on our swing arm cars is to run the softer SW Speed red rubbers on the traction side. The Quickcar rubbers are harder.

We have these in stock at RaceMart ph: 660 465-2069.

WPP
Member
posted June 19, 2002 06:11 PM
I talked to quick car today and the tech man told when the track got really dry slick to put a yellow biscit in the middle and soften the preload but i still have not made my mind up if i should buy one or not i was hoping to here some more on this topic thanks everyone