Visit The Dirt Forum for More Information

Author Topic:   belt driven pump-update
modman97
Member
posted June 15, 2002 09:15 AM
In the beginning of the season we had a long thread on belt driven fuel pumps. Everything I read was positive about the KSE pumps, but they were a little costly. After going through yet another mechanical pump, I purchased a "complete" belt driven set-up from C&S out of Missouri. They were more than helpful, even though I run a competitors carburator(Gaerte). The whole set-up was half as much money(approx.$440). The only problem we encountered was that the mandrel for the crank pulley had to be milled a bit, and I had to get a 3" fan spacer.
So far it has worked perfectly, allowing us to focus more on our suspension. Thanks to everyone who responded ,for their input and enlightenment on this subject.


mod66m
Member
posted June 24, 2002 03:34 PM
The one they sent me was a basic adjustable bypass 2" by 3" thing-a-ma-bob that bolts on the end of the fuel log, and runs the return line back to the cell.(same as the Pro-systems set up I ran in 98')
Not even sure if it is a jet type deal. We just bolted it on and ran it.
The one you mentioned(heim and ball) sounds more like a BG type Bypass. Thats what I ran with the old mechanical pump.