Visit The Dirt Forum for More Information

Author Topic:   Chassis Set-up help please
Wheels47
Member
posted June 03, 2002 10:06 PM
What valvings are you using on the shocks?

jammin


Wheels47
Member
posted June 04, 2002 05:52 PM
Wheels...sorry....the setup sounds like it will work ok on a dry slick track, you probably need to play with spring rates and shock valvings for the heats, they seem like they are a little heavy and will keep the car from rolling over in the heats like you need. The hold down on the left rear is a prime example along with the 94 on the right rear...I would try a 93 on both in the heat and see what it does for you.

jammin


Wheels47
Member
posted June 07, 2002 05:47 PM
Jammin--Thanks for your input-- I appreciate the help for us newbies.. Sooooooo much to learn.

Later Wheels


dlmracnnut
Member
posted June 10, 2002 10:41 PM
I am wondering, what do you think the degree of banking is on the track you run. I was looking at your setup, and think it could work on our car, if the track is similar enough. Our track is about 12 degrees. Also, what tire pressure do you run, and are they Hoosiers? Thanks!


Back to the Archives