Visit The Dirt Forum for More Information

Author Topic:   pull bar
donslink
Member
posted May 23, 2002 11:40 PM
I would try a 600 spring on the pull bar or try stiffer springs in the rear.


donslink
Member
posted May 24, 2002 12:09 AM
go with a 600/1200 progressive spring on pullbar


nut3d
Member
posted May 24, 2002 10:04 AM
Go with the Hypercoil progressive spring it's a little but better then afco's. Afco makes good non progressive springs but they don't make a good progressive. That is just my past dealings i had with there springs.


spde
Member
posted May 24, 2002 08:26 PM
I have a freind that has a swing arm car and he just went to a straight 1200#. It seemed to work really nice. He works up really well.gl


Mod6M
Member
posted May 24, 2002 10:09 PM
Donslink Some may not agree but we run a Z-link swingarm car like this it seems to work well. 950lf 1000rf 325lr 275rr allstar pullbar 25#lr bite with shocks mounted to swingarm bars in front of coils.I like the car with out clamping the LR. Metric (GRT)


WPP
Member
posted May 26, 2002 10:59 AM
Sometimes you have to take angle out of the pullbar on a slick racetrack and back the preload off also run split shocks on the front


andykmod
Member
posted May 27, 2002 03:06 AM
SOUNDS GOOD DONSLINK!!!!!!!!!!!TRY THE PROGRESSIVE SPRING THAT'S WHAT I WOULD DO THEN GO FROM THERE..........U KNOW BUDDY!!!!!!!!!!!!!GO WITH THE GUT FEELING IT ALWAYS WORKS IF NOT FIND A DIFFERENT DRIVER.......LOL..LOL...LOL..


Back to the Archives