Visit The Dirt Forum for More Information

Author Topic:   ? about a Bert
KK17
Member
posted May 16, 2002 06:46 PM
I don't have a bert but its normal in a brinn with straight cut gears you're going to get a little.


rookieracer36
Member
posted May 16, 2002 11:51 PM
I have a bert yes it does do that I just shut it off when changing from first to reverse or reverse to first is easier on it


DodgeBoy76
Member
posted May 17, 2002 12:45 AM
We dont run a bert, but we run a falcon. Basicly the same type of tranny, and ours does grind a little when you put it in low, or reverse. After you run it for a while the clutches will loosen up and it wont grind as bad. But with straight cut gears you will almost always grind them.


Gene
Member
posted May 18, 2002 04:20 PM
I run a Bert, When the idle is a little high it will grind a little bit. Its been doing it for 3 years now without causing a problem. Change the tranny oil every 2 weeks. Mine has a bit of color but the clutches are still orginal.


Back to the Archives