Visit The Dirt Forum for More Information

Author Topic:   rayburn pan-hard bar
WPP
Member
posted May 11, 2002 05:05 PM
I was needing information on a rayburn pan hard bar i was thinking about useing this but i will hook this on the left side of the chassis and run it to the right axle tube over the pinion has anybody tired this i was looking for away to smooth the car down and thought this might work is there any help on this


WPP
Member
posted May 12, 2002 09:47 AM
Any help on this subject whats the thoughts


irace74
Member
posted May 12, 2002 11:13 PM
If I am not mistaken, Jet uses a panhard bar like you describe on their Lear modifieds. Seems to work good on the dry, like good swing arms or z links should. We are looking to put ours, like a rayburn, from the right to the left think this will enhance the left rear bite from the middle out. Got any comments?


WPP
Member
posted May 13, 2002 04:55 AM
DOES JET RUN THEIRS FROM THE LEFT ON THE CHASSIS THE ONLY THING I HAVE NOTICE ON THE RAYBURN THE BAR WAS STRAIGHT ON THE CHASSIS I THINK ON MY CAR IT WOULD HAVE TO BE INCLINED TOWARD THE REAR END I DON'T KNOW IF THIS WOULD EFFECTED ANYTHING OR NOT


hm
Member
posted May 13, 2002 08:29 AM
Why do you want to run it on the right tube? I would recommend running it off the right side to the left tube.
You say you were looking for a way to smooth the car down, what do you mean exactly? Keep in mind with the rayburn bars that the closer you attach it to the wheel, the more that wheel will be affected and the less the opposite wheel will be affected.


WPP
Member
posted May 13, 2002 04:24 PM
THANNKS FOR THE RESPONSE GUYS I TALKED TO JET TODAY AND THEY SAID THEY RUN THOSE TYPES OF PAN-HARD BARS AS FAR AE THE BAR BEING LONGER THE CAR SHOULD BE SMOOTHER THREW THE CORNER THAN THE SHORTER ONES THE ONLY DOWN FALL IS BITE I RELLY DON'T KNOW WHAT TO EXPECTED BY RUNNING THIS TYPE OF BAR I DO KNOW THE ROLLCENTER WILL BE HIGHER WHEN GOING IN THE CORNER BUT I HAVE NOT FIGURED OUT WHAT TO EXPECTED WHEN IT COMES OFF AGAIN THANKS FOR THE INFORMATION GIVE ME SOME MORE


WPP
Member
posted May 13, 2002 08:15 PM
Also would the roll center be more in the center of the rear with the long bar if so would the roll center go to the left during body roll sorry for so many questions just trying to find out some information


Wheels47
Member
posted May 19, 2002 09:20 AM
RACER54 did you like it what kind on angle did you run in it . DID you run it on a dry slick track any information on this would be very helpful


Back to the Archives