Visit The Dirt Forum for More Information

Author Topic:   tight in center
Brooklyn
Member
posted May 06, 2002 07:50 PM
put panhard bar 2nd to bottom hole on pinion side and about 9" up on chassis side, put 200# spring on LR and remove about 30# of LR bite.


Brooklyn
Member
posted May 06, 2002 08:24 PM
TIght in the center only? If so try adding stagger first.


hiredgun
Member
posted May 07, 2002 03:54 PM
try to swap frt. springs just remember to reset the cross %


Back to the Archives