Visit The Dirt Forum for More Information

Author Topic:   3 Link & Dry Slick
MOD RACER#93
Member
posted April 07, 2002 02:50 PM
We run a dw8 on a dry track too, and you may try raising the LR trailing arm one hole up on the frame. If you are running a pull bar, maybe you can lower it one or two holes on the frame, we tried this last nite during the feature, and had plenty of bite coming off the corners, and down the straits...we just ran out of gear. Hope that helps a little.


doug
Member
posted April 07, 2002 07:39 PM
Do you have any more info/ .on your set up. I have a dw8 the buzzard7


MOD RACER#93
Member
posted April 08, 2002 06:17 PM
the cars a 3 link lr in front (on elim.)..rr on top (no elim.).. lr trailing arm in top hole..rr arm in middle hole..spring pull bar in lowest hole..(just something for those running afco spring pull bars..if you feel u might be losing forward bite on dry all of the sudden..prolly take the bar apart cause it will be sticking..and clean it good) cushion j-bar second hole from bottom on the pinion..about half way up the frame mount..


Back to the Archives