Visit The Dirt Forum for More Information

Author Topic:   9in set-up
posted April 02, 2002 09:55 PM
when setting up the pinion is the stock crush sleave ok or should you use a solid sleave,if so whats happening to the crush sleave

posted April 03, 2002 06:39 PM
does the the crush sleave give up what about using solid with shims

posted April 06, 2002 08:01 AM
I had a crush sleeve on my 9" last year and it was a pain. It keep crushing and loosening up the yoke. We went with a solid shim at the end of the year and it seems to work well. I ran the car last nite and still no leaks or loosening up. good luck. ltr spde

Back to the Archives