Visit The Dirt Forum for More Information

Author Topic:   RF brake
2nd2none
Member
posted March 08, 2002 07:09 AM
anyone block off their RF brake, either valve or some other means, and do u think there is an advantage for shuting that brake off? Just wondering if this was a good idea to help get around faster


Modracer05
Member
posted March 08, 2002 10:59 AM
It's a good crutch if you having problems getting the car to turn on entry.

It does help if your rules allow it. In our Late Model days we didn't even run a rotor on the RF.

dirtracer14
Member
posted March 08, 2002 11:22 AM
I have seen guys grind the middle of there pad on the rf never done it myself or used a shutoff. But most rules dont allow a shutoff so grinding the pad whould be best Hey mod05 that track ready yet??


NWModracer
Member
posted March 08, 2002 12:55 PM
Yeah bud, the track is ready and it is beautiful.




Chad
Member
posted March 08, 2002 01:52 PM
I used to always run with the RF shut off with a cheater valve because I couldn't get the car to turn and rotate if I ran 4 wheel brakes. To solve the problem, I installed high quality brake pads, not the junk I was using from Kragen and Chief Auto Parts. I use the good quality pads all the way around. I use the Brakeman pads, but there are Hawk, Performance Friction, Wilwood, Gator and some of my friends use the pads from Speedway. I can drive the car, now, with 4 wheel brakes and it rotates like it has the RF brake shut off. Don't overlook the shape of your rotors. These need to be in good condition to take full advantage of the new stopping power. Lastly, don't be concerned about the aftermarket pads eating up your rotors. I was worried about this but haven't seen it to be an issue.


RPM08MOD
Member
posted March 09, 2002 09:20 PM
You can use a drag racing line-lock to shut off RF. Just plumb it into the line coming out of the master cylinder,it can be hidden in the cockpit. You have to run it backwards from what they do on a drag car so it blocks the fluid from the master-cylinder.Then wire it to a toggle switch,you have to then manually squeze in the caliper before turning on the solinoid.Then if you need RF brake you just turn off and pump brakes.Make sure you dont pump brakes when car is setting and then turn on switch or your brake will lock up.


Back to the Archives