Visit The Dirt Forum for More Information

Author Topic:   Pressure
jakeman21
Member
posted January 31, 2002 02:36 PM
yes you can test the preasure on a glide there can be three places but not always, usually always one on the low band servo cover which will give you the pump preasure i've found thar you can get by with 150psi on a circle track car but need at least 180 to 210 on for drag racing.


yellowjacket45
Member
posted February 05, 2002 05:52 PM
sorry for not telling how, pull out the 1/4 plug on the cover and hook up a preasure gauge start the engine and put it in low rev it to around 1800 and read gauge.put it back in park and gauge should go to zero if no bleed by.


jakeman21
Member
posted February 07, 2002 09:30 AM
thank you sir,