Visit The Dirt Forum for More Information

Author Topic:   DRIVESHAFT TRAVEL
johnf57
Member
posted January 25, 2002 08:49 PM
Has anyone ever cut more splines in the output shaft on a powerglide. I have the aftermarket slip yoke to keep the driveshaft from coming out when I let off but it was bottoming out on the output shaft. I used a die grinder and cut the splines longer but was wondering if it would make it weaker or anything. THANK'S


johnf57
Member
posted January 27, 2002 06:26 PM
Thank's for all your help


dkandy94
Member
posted January 27, 2002 06:32 PM
It shouldn't make any difference. When the drag racers build a "shorty glide", They cut off some of the output shaft & respline it. Once & a while they might twist the splines, but not often. Hope this helps.