Visit The Dirt Forum for More Information

Author Topic:   BRAKE LINES
TOOLBOY
Member
posted January 06, 2002 05:52 PM
i was told its harder to get the air out when bleeding them.


Roadhzrd
Member
posted January 06, 2002 11:57 PM
I would try not to do that if possible. My old car has floor mount pedals and the brakes never did feel right, even tried proportioning valves.


racer20
Member
posted January 07, 2002 08:03 PM
it will work but you need to run a small PSI
residule valve at master cyl. to keep fluid
from draining back into master cyl. I think
it is about 1 lbs valves


Roadhzrd
Member
posted January 08, 2002 01:07 AM
Yeah, Residual pressure valves is what I used. With my calipers being higher than my floor mount pedals I tried every way possible to bleed them but the pedal never did feel as solid as my old hangy down pedals but they did stop the car. Maybe it was just a different pedal ratio but they never felt solid. BTW, I need a set of reverse mount hanging pedals if anybody has some let me know.