Visit The Dirt Forum for More Information

Author Topic:   Reese/lift Bar, who has run it ????
Dirt Track Junkie
Member
posted November 09, 2001 05:07 PM
My modified has a Reese/lift bar (trailer sway bar that mounts to bracket on rearend) on it for traction. The bars that come from Reese and Drawtite are 550-600lbs of rate. I found that Southwest Speed sells a bar that is 350lbs. I have purchased this bar and found the car hooks better on the dry (obviously) but haven't tried it on a heavy track. I'm looking for some feedback on whether I should try a 5th spring or a pullrod instead. Any suggestions ????????


James Birmingham
Member
posted November 09, 2001 05:30 PM
I ran the light bar on a LM on a very dry slick track with a 2 link and a brake spring and shock. Man the thing would hook up. It was such a simple set up you couldnt get out of the zone hardly. I dont know about a heavy track the 2 I ran at the time we had that car, never got tacky.


zero
Member
posted November 13, 2001 10:13 AM
Thanks for the input. I just realized that I forgot to mention the type of suspension I'm running. It's a Z-link suspension with equal length bars 20" on all four bars and they are not adjustable on the frame, so the angles stay the same except for the change during travel. The bars were mounted level at 5" of ride height. The rearend is floated and doesn't have the capability of being clamped down. I use the lift bar for traction and have an adjustable snubber bar on top of the rearend to put load on the bar and control braking (along with a 90/10 shock.

[This message has been edited by Dirt Track Junkie (edited November 15, 2001).]

andykmod
Member
posted November 21, 2001 01:22 AM
What chassis brand,I have a rear suspension just like that, i run a pull bar with 1250lb spring hooks up great.


Dirt Track Junkie
Member
posted November 22, 2001 11:45 AM
The chassis was built by Lou Fegers race cars. But the rear suspension was done by the dealer I bought it from, Winning Attitude Motorsports. W.A. orders the chassis without rear suspension and then adds their own. I'm just trying to learn more myself, to get the most out of my car. I have tried a pull-rod, but it has a long rubber absorber (??? not sure what to call it) in it. It's too soft for a hooked up track but is pretty good when the track is dry.