Visit The Dirt Forum for More Information

Author Topic:   swing arm angles
tagteam racing
Member
posted April 13, 2001 01:57 AM
It will depend on the amount of forward bite that you need. The top arms need to stay level and change the angle of the lower arms to increase forward bite.


tagteam racing
Member
posted April 17, 2001 10:03 PM
The top bar on my car has no adjustment. It is fixed at a level position.All of the other cars I have looked at with type of suspension have been the same way. Adding preload on the torque link makes it react sooner to load inputs. Increasing the angle of the torque link adds forward bite, but it will also loose it sooner.


tagteam racing
Member
posted April 17, 2001 11:45 PM
That would make sense though, you should be able to lower the upper link of the z-link to promote quicker forward bite to a point, then it would wheel hop