Visit The Dirt Forum for More Information

Author Topic:   powerglide continued
wheels13
Member
posted April 09, 2001 08:29 AM
what is the latest and greatest on using the powerglides without the valve of other external valving. what is the final decision on the proper hole size for these trannies?


Roger 01
Member
posted April 11, 2001 12:33 AM
7/64 both rev and low works great I have ran this 2 nights worked flawless (knock on wood)its agressive in rev but you can ratchet to nutruel easy really like it and so much cleaner Roger (driver of the one Quickrick built)


jammin
Administrator
posted April 12, 2001 10:43 AM
I am going to put 1/8 in low and see it if will idle....if it does, I will let everyone know....


jammin
Administrator
posted April 24, 2001 06:01 PM
I used the 1/8" hole in the server bore....right on the money. I use the 7/64 hole in the rear piston and an additional 1/16 hole on the opposite side of the piston. It works great. No wheel spin or anything.

jammin