Visit The Dirt Forum for More Information

Author Topic:   Setting Driveshaft Length
Iowamod20
Member
posted March 21, 2001 09:02 AM
How much of the yoke should be stuck into the transmission with the car at static ride heights? I don't want the new driveshaft to fall out and/or bottom out against the tailstock and bust it off.

The yoke is about 3 1/4" long.

Thanks.

A2KY2K88
Member
posted March 21, 2001 12:11 PM
YOU NEED 3/4 INCH BETWEEN THE TRANNY AND THE YOKE.


ufb
Member
posted March 22, 2001 02:35 PM
drive shaft lenght if you have a chevy back of block to center of rear 72" using p/g,4sp,or brinn should be 30.5" long using bert 33" long