Visit The Dirt Forum for More Information

Author Topic:   SPARK PLUG HELP
D-CUZZ
unregistered
posted March 07, 2001 04:36 PM           
I AM BUILDING A NEW MOTOR THIS YEAR 377 WITH BRODEX #10 ALM. HEADS AND DOME PISTONS I PLAN ON RUNNING ALKY AND DON'T KNOW WHAT PLUGS TO USE. YOUR HELP PLEASE


modbob35
Member
posted March 08, 2001 05:56 AM
I have about the same setup and using Autolite Racing Plugs AR51. Set at .025" per Autolite.


wfoondirt
Member
posted March 08, 2001 08:39 AM
I run autolite 2594 or 2593 dependant on weather, same heat range as the 51 but with an extended electrode. .025 is a little tight for alcohol but it depends on your ignition system. With a good cad system you should run .035-.045 gap.

[This message has been edited by wfoondirt (edited March 08, 2001).]