Visit The Dirt Forum for More Information

Author Topic:   31 spline
Pigpen
Member
posted January 29, 2001 12:38 AM
Will a 31 spline full spool fit into a 28 spline carrier?


dirtracer14
Member
posted January 29, 2001 08:46 PM
Have done it many times unless we got lucky!


Racer 111
Member
posted January 29, 2001 08:51 PM
Just as long the bearing size is the same.There is 2 size's of bearings for the 9 inch that I know of.Big and small easy to tell.


dqr-7
Member
posted January 29, 2001 09:03 PM
what dqr-7 is talking about is .....If you use the stock carrier and just put in a mini spool for a 31 spline the carrier needs to be drilled to 1 3/8" where the axles go into the carrier............If you don't do this before you put it all together you did all this work just for practice.........Just clearing it up a little......GOOD POINT DQR-7


Roadhzrd
Member
posted January 29, 2001 11:54 PM
I found that out once on race day. I thought I had all of my unknowns out of the way. whoops I ended up taking a die grinder to the opening on the pig and it worked fine.