Visit The Dirt Forum for More Information

Author Topic:   Mosier axles for a metric GM rear end.
poboy2
Member
posted November 24, 2002 07:04 PM
Any know the Mosier web site or who make sell these retail? Thanks


racer2
Member
posted November 24, 2002 07:39 PM
http://www.moserengineering.com/


jjnbs
Member
posted November 24, 2002 07:40 PM
Quick performance has every thing you need at a great price.www.quickperformance.com or 515-232-0126


racer17j
Member
posted December 03, 2002 07:57 PM
just make sure you get the right studs with it i got one from them and it had the long drag racing type studs in it not to good for quick pitstops lol


LUBEGUY07
Member
posted December 03, 2002 08:09 PM
I bought a set from quick performance for this year and was happy with them and priced right too, they even drill them for your stud size, im getting another set for my 12 bolt im gonna run this year. 17j i got them extra long studs and i think its easeir to change a tire.



poboy2
Member
posted December 03, 2002 08:55 PM
Thanks guys,I'll check them out. What kind of price do they run? Has anyone ever had any problems with them? Here is my theory. The metric rearend is much lighter than the 9" Ford, and on top of that it is unsprung weight. Therefore if I could get say.. 51% rear weight with a GM rearend vs 51% with the Ford, I am going to have alot more rear weight transfer in the car, hopefully meaning more rear bite. What do ya think?


racer17j
Member
posted December 03, 2002 10:49 PM
what size are yours lube mine are the 1/2 fine thread and are about 4 inches long just barely inside the wheel if i put a stock rally wheel on it it would stick out past it my other ones are the same length as stock those come off pretty ez only about 1/2in past the nut when they are tightened down compared to 3 in on the moser


LUBEGUY07
Member
posted December 04, 2002 08:56 PM
my studs are 3 inch long and 5/8 dia. poboy I think a set of them cost around 250 but cant remenber for sure


Back to the Archives