Visit The Dirt Forum for More Information

Author Topic:   Power Steering set up?
Eljojo
Member
posted October 28, 2002 05:18 PM
I've heard that the power steering pump from a stock Citation was very similar to the aftermarket ones I always see in the magazines. Has anyone ever converted a "junkyard" pump? What has to be done to it to make it work properly? I'm one of those guys who believe that GM stuff is generally better than aftermarket stuff, and ALWAYS try to save a buck or two. Any help here would be greatlt appreciated!

[This message has been edited by Eljojo (edited October 28, 2002).]

c21
Member
posted October 29, 2002 10:28 AM
find a cavaliar, astro van or i believe a le baron also has the same style pump on it basicly look for something with a 2.2 in it


Eljojo
Member
posted October 29, 2002 04:46 PM
Cavalier! OK! Will I need to thread some fittings into the pump? Does it work (in stock configuration) with a remote reservior?Would I want to replace the stock reservoir with a different tank? I'll be checking the local junkyard if it EVER stops raining!LOL


66jj
Member
posted October 29, 2002 06:13 PM
its off a astro van, you still need to buy the larger pulley, and block mt.

i use the stock fittings and stock plastic reservoir...

been useing one for 5 years.


Back to the Archives