posted August 06, 2002 08:07 PM
I have a 75 camaro and I'm having trouble getting enough positive camber on my left front. How can I remedy this? Is there an offset control arm shaft I can use or do I have to move the ball joint out some? Thanks in advance.
posted August 06, 2002 09:47 PM
moog makes offset crossbars that will help your problem most auto parts stores can get them
posted August 06, 2002 10:21 PM
take the left lower control arm out and move the front mounting bolt in about 1/2 to 3/4 of an inch. drill a new hole and weld some good heavy washers around the hole. this will move the lower ball joint ahead and in giving you more positive camber and caster.
posted August 08, 2002 06:13 PM
I just gor the offset control arm shaft and I'm going to replace it with the stock shaft but I can't seem to get the old bushings out of the contol arm. I've tried driving them out with no success. Is there an easier way to get these darn things outJ? Thanks for the help...again.
posted August 08, 2002 08:00 PM
Do you have an air chisel? It works pretty well.