Visit The Dirt Forum for More Information

Author Topic:   Tierods
hotrod99
Member
posted June 02, 2002 08:32 PM
I was wondering if there is anyway to make them stronger..We have a bad problem with them breaking and bending when we get bumped..The thing is we have to ***** the ends out way to far..Any and all help would be greatly apreciated..Thanks alot


hotrod99
Member
posted June 02, 2002 08:33 PM
By the way this is on a 77 Thunderbird


redneck racing
Member
posted June 04, 2002 04:37 PM
Seen some where in Circle Track about a month or so ago that they are now making some stronger ones for street stock application let me see if i can find it and get you an address or something or try to get Moog parts ive used them there a little more on the pocket book but i like them Good Luck Eddie


redneck bubbas racing
Member
posted June 04, 2002 10:53 PM
One thing to always remember when trying to strengthen parts is something IS going to bend. I would rather bend a $15 tie rod than a $30 spindle and the half day of work finding and then pulling it in the ant pile.


powerglides
Member
posted June 05, 2002 06:01 AM
Go to the auto parts store and ask them for old front end books. they have the dimensions of tie rods in them, you can mix and match to get what you want.


Back to the Archives