posted June 02, 2002 04:10 PM
I have a powerglide tranny, should i take out the module and replace it with a plug or should i just put a plug on the module itself thanks Eddie
posted June 03, 2002 02:41 AM
i just put a cap over mine on a t-350 don't think a glide would be much diferent
redneck racing Member
posted June 20, 2002 05:59 PM
17j should i put a new module in it or just cap the old one and not worry Eddie
posted June 20, 2002 11:05 PM
quote:Originally posted by redneck racing: 17j should i put a new module in it or just cap the old one and not worry Eddie
as long as your modulator valve is not leaking just unplug the vacume line from the valve and the engine and only plug the vacume source at the intake manifold.this way you will be able to tell if a leak develops at the valve. disconnecting it increases the transmission operating pressures to keep gears engaged,it also increases trans operating temeratures due to greater pressures so a quality tranny cooler is highly reccommended.
posted June 21, 2002 10:31 AM
Do not remove the vacumm modulator valve. It is the only thing that holds the valve in the tranny all the way in, if you replace it with a plug it has to be tight against the valve in the valve body or you will loose pressure. unplug it and leave it.