Visit The Dirt Forum for More Information

Author Topic:   Intake help please.
rusty88
Member
posted April 16, 2002 10:53 AM
I am looking for a good stock cast intake to use. I have one with the #'s 14007372 but do not know if it is a good one to use any help would be appreciated. I looked in the toolbox and these #'s are not posted. Thank You for any help.
Russ (C & R Racing)


redneck racing
Member
posted April 25, 2002 03:09 PM
Rusty88 ive hunted everywhere on the net for intake cast #'s and couldnt find a thing , did find 2 pages of casting #'s for heads that will come in usefull, a buddy of mine who use to race and is a big Chevy buff told me this much by the casting # you should find a 1" letter R-being the best T-2nd best and S-the least. Ive got a T on my car right now and am trying to come up with an R. Hope this helps. Eddie


snowman
Member
posted April 25, 2002 08:32 PM
The GM performance "marine" intake part number is 14096011. It's like the z28, except its cast iorn. Your local GM dealer can order it for you.

Good luck,
Snowman


rusty88
Member
posted April 25, 2002 09:23 PM
Thanks alot guys I will try the dealer in the morning hope you all have a good season.


racer17j
Member
posted April 26, 2002 03:01 AM
midwest and jr motorsports bolth sell stock cast intakes might be a little cheaper than a dealership


Dixon
Member
posted April 26, 2002 09:23 AM
Snowman is right on with that "marine" casting. A friend of mine uses it and he swears it's the best for that application


snowman
Member
posted April 28, 2002 10:51 PM
Thanks Dixon. I think it's the way to go if you must use cast iron. Some tracks have outlawed it. I don't know if they outlawed it beause of it's performance or, just as a cost control. Man, I hope it's not illegal at Rusty's track....He might not like me very much. Perhaps I should have mentioned that earlier.....Sorry. What can I say ? Nobody's perfect..........

Congrats to " The Dirt Forum Champ", Racer17j. I salute You, Fine Sir. Not only on your racing experience and knowledge, But also on your great attitude, Your willingness to help others and share your experiences. You're the CHAMP !!!!!!!!

Best of luck to You,
Snowman


rusty88
Member
posted May 01, 2002 08:04 PM
Hey guys thanks for all the help. I was just wondering if anyone has heard of a Canada K intake before I am told they are a good flowing intake and work well for racing.


Radrcr869
Member
posted May 02, 2002 03:48 AM
Rusty I have told and have also seen Several
Street Stock Guys Talk and Use that Intake it flows better than even the Truck Intake


fieri4
Member
posted May 04, 2002 02:44 PM
we run a brzezinski manifold. it is a worked over cast iron that out flows a marine manifold. brzezinski offer different levels of modifications. it can be a little pricey,
but well worth it.


Back to the Archives