posted April 06, 2002 11:20 PM
I AM LOOKING AT A 78 MONTECARLO FOR A STREETSTOCK. I HAVE BEEN TOLD NOT TO USE IT BECAUSE 82 AND NEWER ARE INTERCHANGABLE BUT OLDER ARE NOT. IS THIS TRUE? AND IS THERE ANY OTHER DRAW BACKS.
posted April 06, 2002 11:42 PM
frame wise a metric is a mertic there are a couple differences but thats not the year more to the model the only difference is the body presonally i don't like the shape of the older ones and don't like the angle of the deck lid seen a few of the older ones get road up do to the angle
[This message has been edited by racer17j (edited April 06, 2002).]
posted April 07, 2002 09:01 AM
the only thing that will not interchange is the spindles and rotors the bearing size is different but you can put the a-arms ,spindles,and rotors on from a 1982 and you will be all set
posted April 07, 2002 01:38 PM
1978 was the year that had different spindles and hubs , even S-10 front end parts exchange oldgold
posted April 08, 2002 06:35 AM
One other difference I can think of is the rear pinion bearing on the 78 is smaller than 79 and up rears. The gears are the same.