Visit The Dirt Forum for More Information

Author Topic:   Rear End problems
richie
Member
posted April 04, 2002 10:48 AM
We are running a 9" ford rear with a spool. We keep breaking the caps. 3 times now. The last 2 rears were purchased set up by the manufacturer. Any thoughts on what is causing this are most welcome.
Thanks for any help. Going Rear End Broke
Rich


Dixon
Member
posted April 05, 2002 10:51 AM
Does your track have really tight turns? Who made the rear end?


Flatlander
Member
posted April 05, 2002 12:01 PM
quote:
Originally posted by Dixon:
Does your track have really tight turns? Who made the rear end?

It is a tight 1/4 Dont hae the makers name with me at the puter but it came from wisconsin. Our pinion angle is well within the manufacturers specs. Really weird. Our 633 is ok. As soon as we try to go to the 650 BANG! We even had the thing sent to us ready to race set up by the makers. Pinion angle the same as in the 633. We are really getting pod cause we need the 650 to run up front. Thanks to everybody for the input.

Back to the Archives