Visit The Dirt Forum for More Information

Author Topic:   motor?
Pickel
Member
posted January 29, 2002 01:34 PM
Could I have to big of a cam for my motor..I have a 355 11to1 with hump heads 202 valves on a 2bbl.. the cam number is 915-14102...it says gross lift it 533/555..just lookin to get more torqe out of the motor..


wkramer
Member
posted January 29, 2002 03:53 PM
what is the duration?


Pickel
Member
posted January 29, 2002 08:42 PM
Advertised duration 285/295


owracer
Member
posted February 01, 2002 07:10 PM
That's a pretty common cam for open wheel mods. I would go to a shorter duration to increase torque at the lower RPM range and go to around a .500 lift. The 2 barrel is an air flow restriction so you need to match your cam to that.


Back to the Archives