Visit The Dirt Forum for More Information

Author Topic:   pulling vacume
hobbystock41
Member
posted January 20, 2002 02:03 AM
we have a 10inche vacume rule at 800rpm idle. no 4brl manifolds allowed and no spacers. just dropped in a 480 hydralic cam and now pulling 81/2inches. any suggestions?


mike kelly
Member
posted January 20, 2002 02:19 PM
More compression, less duration, wider lobe seperations, smaller intake runners. That's about all you can do. i'd go for more compression as long as your not limited.


hobbystock41
Member
posted January 22, 2002 01:06 AM
quote:
Originally posted by 3xracing:
More compression, less duration, wider lobe seperations, smaller intake runners. That's about all you can do. i'd go for more compression as long as your not limited.

thank you both for your suggestions. tried them both and we are now pulling required vacume. i appreciate the help.

Back to the Archives