Visit The Dirt Forum for More Information

Author Topic:   Are there any pre-bent roll bar kits available?
Mike Rothwell
Member
posted July 26, 2001 11:22 PM
Hi. What are you guys doing for your roll bars? I can weld so I'd sooner buy a pre-bent kit and install it myself to save some money. I haven't bought a car yet but it will be a GM street stock. Any links to websites would be great. Thanks!


ryan
Member
posted July 27, 2001 01:09 AM
Try going to www.stockcarproducts.com They are in Virgina or somewhere around there. They sell pre-bent and pre-notched roll cages for whatever model of car you have. Their best cage kit (which I have in my metric) is around $350 plus $30 to get it to your house. No sales tax if you are out of state. Hope this helps


DEEDDUDE
Member
posted July 27, 2001 08:56 AM
I've had allot of luck with cage kits from CSC Racing in Canada. They go together real easy. You can build a jig for the basic kit out of 2 x 4's or 2 x 2 square tubing tack it up and put it in the car. I always run the 4 door bars on each side kit, buy the basic kit and then go to a steel supply house and buy tubing for your straight runs. Itís cheaper this way and it is the same tubing. CSC has a web site you can find it with the search engine. If you have the kit sent to a business you can save $40 on shipping. Deed


Mike Rothwell
Member
posted July 27, 2001 09:09 AM
Sweet. Thanks alot guys.


Racer4
unregistered
posted July 29, 2001 09:09 PM           
Howe sells a very nice Cage kit that rivals the one's you'll see in Nascar for around 300, then you build your front and rear hoops.


Back to the Archives