Visit The Dirt Forum for More Information

Author Topic:   Clutch slave cylinder?
chomme
Member
posted March 23, 2001 10:22 PM
What type of clutch are you using?


chomme
Member
posted March 24, 2001 10:00 PM
i went to the hydraulic throwout for the stock clutch last year and i would never go any other way it is so sweet you dont have to worry about the very littlroom there is for a slave cyl.i crashed last year and would have never been able to move the car if i had a slave cyl.


chomme
Member
posted March 26, 2001 09:24 PM
After some frustration, I decided to go with the Afco push type slave cylinder and run my regular heavy duty fork. The clutch came from 10,000rpm and they told me that I need a "round face bearing with at least 1/2 inch travel." They said Howe has a good one and to call them. So, I call Howe and they have two models...one is round face and has .375" travel, and the other has a different face and .750" travel. So, I called back 10,000rpm and they had no idea which one to use. So, I am going to run their throwout bearing with the Afco setup.