Visit The Dirt Forum for More Information

Author Topic:   CONNECTING RODS
JML
Member
posted March 12, 2001 10:24 PM
I AM IN THE PROCESS OF BUILDING A 355 STREET STOCK ENGINE.RULES SAY STOCK 5.7 RODS NO POLISHING.WHAT ARE THE BEST ROD FOR THIS ENGINE? SOME PEOPLE SAY X- RODS OTHERS SAY O- RODS AND OTHERS SAY K-RODS. I HAVE ONE SET OF EACH. THE X&O-RODS SEEM THIN ON THE SMALL END.THE K-RODS SEEM BEEFER ON THAT END.I ALSO HAVE A SET OF RODS FROM AN OLD DRAG MOTOR,THEY LOOK THIN ON THE SMALL END,BUT ON THE BIG END THEY SEEM TO HAVE MORE, ESPECIALY NEAR THE ROD BOLT. I ONLY HAVE 6 OF THOSE AND I CANT FIND ANOTHER SET.WHATS MY BEST BET. P.S. I INTEND ON FLOATING THE PIN .NO BUSHING.


MOD RACER#93
Member
posted March 12, 2001 10:31 PM
Chevy has their new vortec powder coated rod,,, the best bang for the buck. Rated better than their pink rod.

------------------
RACING IS A HOBBY
GO HAVE FUN


chomme
Member
posted March 16, 2001 03:15 PM
Run the new powder coated rods. You can buy them from Jim Pace Performance Parts or Scoggin ****ey...best bang for the buck by far. I've run them with no problems.