Visit The Dirt Forum for More Information

Author Topic:   Dry Slick Setup
e&e
Member
posted July 17, 2000 09:54 AM
Running 3200# Super Stock setup with a IMCA pullbar and J-Bar with stock trailing arms.Pullbar has 800# spring is running straight forward off center of rear end with 10 degree down angle. J-bar hooked to passenger side frame and to pinion mount running level with center mounted on the centerline fo the axles. Is there any adjustment to pullbar or j-bar that would help with forward bite? Softer spring or angle change on pullbar or j-bar?


jammin
Administrator
posted July 17, 2000 11:04 AM
If your wanting more forward bite, you can lighten the spring rate and it will help you.


Back to the Archives