Visit The Dirt Forum for More Information

Author Topic:   vega flywheel
racer17j
Member
posted October 30, 2002 08:28 AM
i found a vega flywheel and clutch set up would this work on a 350 or not?


c21
Member
posted October 30, 2002 10:04 AM
Yes, it will work on a 350. I think you'll have to change the starter head, though. Total weight of the flywheel, clutch, and pressure plate about 27 lbs, very light. You'll definitely feel the difference if you're running a stock set-up. You're lucky to have found one. They're as rare as chicken teeth around here!


autoshop
Member
posted October 31, 2002 10:23 AM
thats the one i was looking at thanks big mouth lol


tilley88
Member
posted October 31, 2002 09:12 PM
Hey 17j, you gonna use this on a mod? Just a word of advice; don't use it with a hi-horse motor. I saw a vega clutch disintegrate 3rd nite out in a limited late model a few years back. He was running a dart-headed 377. But I've also used one in a heavy streeter with a dome 355 with no ill effects. Good luck!


racer17j
Member
posted November 01, 2002 06:56 AM
i'm going to be running b mods 360 cid 9:1 comp 2400# probaly turn around 6800-7200


tilley88
Member
posted November 01, 2002 07:48 AM
You should be O.K.


autoshop
Member
posted November 01, 2002 12:26 PM
no prob just flipp'n ya some chit


hawk18
Member
posted November 03, 2002 11:21 PM
if any one on here is looking for vega stuff leave a message, I used to race them 10 years ago and still have quite a bit of stuff left.


tilley88
Member
posted November 04, 2002 12:48 AM
Got any Vega flywheels for a stick?


racer17j
Member
posted November 04, 2002 03:47 AM
ya looks like i may need one kinda funny went for 4 days with no bids then within a few hours had 7


tilley88
Member
posted November 04, 2002 08:48 AM
Yeah, thats eBay for ya!


redneck bubbas racing
Member
posted November 06, 2002 12:19 AM
Just wondering 17J, did you end up winning the bid? I read all of this on here and checked it out on ebay. i was gonna bid but I couldn't do it, my conscius (sp) was just too strong. I wouldn't feel right taking something away from ya. But if you didn't win it then I'm gonna be so mad! By the way hawk, leave me an email at bubbat@glade.net


racer17j
Member
posted November 06, 2002 09:16 AM
unlike some dumb arses i wait till the last minute to do my bidding unfortunatly i had to go out to the field while it ran out. i still can't figure out why people bid on stuff 3-4 days before it closes just cost you more in the long run if you ask me


tilley88
Member
posted November 06, 2002 01:41 PM
Yeah, that's the way I bid, too. Then sit there and watch nervously those last 30 seconds, hitting the refresh button every 3 secs..... it's almost addicting!!


rico 08
Member
posted November 06, 2002 02:05 PM
if u like to go fast check out the russian fighter on e-bay,pretty cool!


outlawstock17
Member
posted November 06, 2002 02:08 PM
17j, check this out. you don't have to be sittin' at your computer when the auction ends. it's free!
http://www.hammertap.com/powertool/


fastrack1
Member
posted November 16, 2002 06:52 AM
SINCE WE ARE TALKING VEGAS DOES ANYONE KNOW THE GEAR RATIOS IN THE STANDARD TRANSMISSION AND DID THEY HAVE 3 OR 4 SPEEDS IF SO PLEASE POST THANKS

[This message has been edited by fastrack1 (edited November 16, 2002).]

tilley88
Member
posted November 16, 2002 10:37 AM
4-speeds with 2.47 second, 1.65 third.


Back to the Archives