Visit The Dirt Forum for More Information

Author Topic:   400 block
P5Racing
Member
posted October 20, 2002 11:47 PM
i have a 400 block,but the rules say i can't go over 362 cu.in. I have 993 heads 350 crank, and need to run the small balancer. I seen in hear where the 400 was good tough block. I have a 305 lunati cam solid lift, but need tp know the lift on it.We run on a 1/4 mile track. An is this a good cam to run.
David


fordsblow
Member
posted October 21, 2002 01:15 AM
A 400 standard bore block with a 350 (3.48") crank is 372.1 C.I.
You need a shorter stroke to stay under your 362 C.I. limit.
Ken


rico 08
Member
posted October 21, 2002 12:09 PM
you'd have to run a 327 large journal crank with custom pistons to get below 362 and you would have to really spin it to make up for the lost torque.


P5Racing
Member
posted October 22, 2002 06:27 PM
Can the techman tell it's a 400 with the 350 crank in it. An can it help any on horsepower. Over a 350 30 over bore. i need some more off the corner.


JMillerJr76
Member
posted October 22, 2002 07:18 PM
You can see right away that you are running a 400 block by the extra freeze plug on the side of the block, even with the real old 400s, you can see where the freeze plug would go. As far a the crank goes, just looking at it you probally couldnt tell, unless they brought out all the gauges to actually check to see what you are running...
just my thoughts


c21
Member
posted October 23, 2002 11:36 AM
the very late 400 blocks just have a 509 on side easy to grind off.I beleive they are 79'up truck motors.


Monster
Member
posted October 23, 2002 09:56 PM
**** , if you're gonna cheat, make it a 406. Use a 350 balancer, have the crank guy put in some mallory up in the front counterweight to properly rebalance. He will know what to do. You will definitely have more off the corner. There are some 400 blocks that only have 2 freeze plugs, and are outwardly identical to 10/20/509/532 350 blocks, EXCEPT for those telltale bulges!


2nd2none
Member
posted October 24, 2002 12:14 AM
or spend the $$$ on having the 400 internally balanced so it uses 350 balancer and flywheel. but if your tech guy has a puffer you wont be able to get passed that......


66jj
Member
posted October 24, 2002 11:29 PM
Its way way cheaper to buy a good steel 4340 crank that is allready built for internal balancing, eagle makes a 50# one now thats 399.99 brand new 4340...

jj

tilley88
Member
posted October 25, 2002 12:09 PM
BHJ sells a 6.25 inch balancer for externally balanced engines. $109 plus shipping. Degreed with a retention ring on the back of the balancer to keep it from separating. Nice piece.


Back to the Archives