Visit The Dirt Forum for More Information

Author Topic:   307 stroker?
AC156
Member
posted June 29, 2002 09:55 PM
If you bore it to 4.00 and use 350 crank and pistons you have a standard 350.Have run them at 4.030 and had no problems in a ss or mod.


Eljojo
Member
posted July 01, 2002 09:07 PM
Have some fun with it! Take the crank and slip it into a 400 block.I THINK you'll have to use pistons for a 6.125 rod and run them on a 6" rod....Should build a boltload of hp @ upper rpm ranges--but not a lot of torque due to the short stroke. I had gotten some input off this forum last winter and it sounds to me like it would be the ticket in a stock crank 355 class---with a light car


Back to the Archives