Visit The Dirt Forum for More Information

Author Topic:   Rod side clearance
fast19
Member
posted June 17, 2002 04:03 PM
Side clearance is based on the thickness of the rod ends where they run beside ea other.
As they wear the clearance increases.

Sounds like you need new rods. I don't know that there is any reliable way of fixing it otherwise.

booting left
Member
posted June 17, 2002 06:34 PM
CHECK CRANKSHAFT FOR WEAR OR POOR WORKMANSHIP CHEAP CRANKS SOMETIMES HAVE POOR TOLERANCES


birdcage
Member
posted June 17, 2002 07:10 PM
SBC rods are generally .942 to .945 wide on big end. I'd say you're cranks ground to wide.


fast19
Member
posted June 18, 2002 09:04 AM
Sounds like my crank may have been ground wrong. rods measure fine.
Thanks Guys!
19


Back to the Archives