Visit The Dirt Forum for More Information

Author Topic:   305 heads?
nate 11
Member
posted June 11, 2002 07:50 PM
will 305 heads work on 355 with flat tops,have to run stock intake 4bbl. 450 lift cam? if so what # of head to look for? thanks.. nate 11


dode
Member
posted June 12, 2002 08:32 AM
Yes, they will...I have a set of heads that have never been run at a race since being back from the machine shop. Only a little tuning time. Our track went to a compression rule, so we had to switch heads. Would you be interested? They have had all needed work done on them and they are ready to go.

John

bbchs
Member
posted June 12, 2002 07:55 PM
I have used the 416 heads for 2 years now and they seem to work good. 58cc chambers, 1.84/1.50 valve size.


nate 11
Member
posted June 15, 2002 09:40 AM
Dode,
Yes, I may be interested. How much, and where are you located? (Sorry for the delay in responding.)
Thanks,
Nate11


dode
Member
posted June 17, 2002 08:55 AM
I sent you email regarding the heads.

John

Back to the Archives