Visit The Dirt Forum for More Information

Author Topic:   351winsor heads
Big Bird
Member
posted June 05, 2002 08:23 PM
Whitch would be better heads to run whith a 2 barrel DOOE or C90E it has a pretty big cam and 10 5 to7 ****tons thanks for any help


Brad haddix
Member
posted June 06, 2002 08:11 AM
the C9 are 1969 small chamber,and the D0 are 1970 with bigger chambers. they are the best factory castings,only difference is chamber size, they have the same ports. How much compression you want will be the deciding factor


d4490
Member
posted June 06, 2002 05:45 PM
The only difference of these heads are the year they are casted. The C9 are 1969 and the D0 are 1970. They have the same combustion chamber size, 60cc unmilled. I have a set of the D0OE heads in my street stock, they work pretty good.


KPLugnut
Member
posted June 06, 2002 08:41 PM
If you're interested, I have a set of World Products Windsor heads for sale.
complete with 2.02/1.60 severe duty valves, big springs, studs and guideplates.
This is a killer set of heads...

KPLugnut
http://www.kineticperformance.net
email: kineticperformance@thedirtforum.com
ph: 607-277-6462 (EST, eves/weekends)


dode
Member
posted June 07, 2002 10:14 AM
how much kpl? are they 180's or 200's?

John

KPLugnut
Member
posted June 07, 2002 11:46 AM
definitely 200's and then some. These are the 031 heads that they don't make anymore. They came out before the Rousch 200's did, and until the new "N" heads came out, there were no better flowing heads for the Windsors and 302's.

I'll take $800 for them plus shipping. There's all good parts in them and they are easily worth that much.

KPLugnut

[This message has been edited by KPLugnut (edited June 07, 2002).]

Tom Asmus
Member
posted June 08, 2002 11:34 AM
Angle mill your stock heads!! That will make a big difference!! Bumps up the compression!


Back to the Archives